Commands
All commands are case-insensitive, but most keywords are case-sensitive.
SETCONF
Change the value of one or more configuration variables. The syntax is:
"SETCONF" 1*(SP keyword ["=" value]) CRLF
value = String / QuotedString
Tor behaves as though it had just read each of the key-value pairs from its configuration file. Keywords with no corresponding values have their configuration values reset to 0 or NULL (use RESETCONF if you want to set it back to its default). SETCONF is all-or-nothing: if there is an error in any of the configuration settings, Tor sets none of them.
Tor responds with a "250 OK" reply on success. If some of the listed keywords can't be found, Tor replies with a "552 Unrecognized option" message. Otherwise, Tor responds with a "513 syntax error in configuration values" reply on syntax error, or a "553 impossible configuration setting" reply on a semantic error.
Some configuration options (e.g. "Bridge") take multiple values. Also, some configuration keys (e.g. for hidden services and for entry guard lists) form a context-sensitive group where order matters (see GETCONF below). In these cases, setting any of the options in a SETCONF command is taken to reset all of the others. For example, if two ORListenAddress values are configured, and a SETCONF command arrives containing a single ORListenAddress value, the new command's value replaces the two old values.
Sometimes it is not possible to change configuration options solely by issuing a series of SETCONF commands, because the value of one of the configuration options depends on the value of another which has not yet been set. Such situations can be overcome by setting multiple configuration options with a single SETCONF command (e.g. SETCONF ORPort=443 ORListenAddress=9001).
RESETCONF
Remove all settings for a given configuration option entirely, assign its default value (if any), and then assign the String provided. Typically the String is left empty, to simply set an option back to its default. The syntax is:
"RESETCONF" 1*(SP keyword ["=" String]) CRLF
Otherwise it behaves like SETCONF above.
GETCONF
Request the value of zero or more configuration variable(s). The syntax is:
"GETCONF" *(SP keyword) CRLF
If all of the listed keywords exist in the Tor configuration, Tor replies with a series of reply lines of the form:
250 keyword=value
If any option is set to a 'default' value semantically different from an empty string, Tor may reply with a reply line of the form:
250 keyword
Value may be a raw value or a quoted string. Tor will try to use unquoted values except when the value could be misinterpreted through not being quoted. (Right now, Tor supports no such misinterpretable values for configuration options.)
If some of the listed keywords can't be found, Tor replies with a "552 unknown configuration keyword" message.
If an option appears multiple times in the configuration, all of its key-value pairs are returned in order.
If no keywords were provided, Tor responds with "250 OK" message.
Some options are context-sensitive, and depend on other options with different keywords. These cannot be fetched directly. Currently there is only one such option: clients should use the "HiddenServiceOptions" virtual keyword to get all HiddenServiceDir, HiddenServicePort, HiddenServiceVersion, and HiddenserviceAuthorizeClient option settings.
SETEVENTS
Request the server to inform the client about interesting events. The syntax is:
"SETEVENTS" [SP "EXTENDED"] *(SP EventCode) CRLF
EventCode = 1*(ALPHA / "_") (see section 4.1.x for event types)
Any events not listed in the SETEVENTS line are turned off; thus, sending SETEVENTS with an empty body turns off all event reporting.
The server responds with a "250 OK" reply on success, and a "552 Unrecognized event" reply if one of the event codes isn't recognized. (On error, the list of active event codes isn't changed.)
If the flag string "EXTENDED" is provided, Tor may provide extra information with events for this connection; see 4.1 for more information. NOTE: All events on a given connection will be provided in extended format, or none. NOTE: "EXTENDED" was first supported in Tor 0.1.1.9-alpha; it is always-on in Tor 0.2.2.1-alpha and later.
Each event is described in more detail in Section 4.1.
AUTHENTICATE
Sent from the client to the server. The syntax is:
"AUTHENTICATE" [ SP 1*HEXDIG / QuotedString ] CRLF
This command is used to authenticate to the server. The provided string is one of the following:
* (For the HASHEDPASSWORD authentication method; see 3.21)
The original password represented as a QuotedString.
* (For the COOKIE is authentication method; see 3.21)
The contents of the cookie file, formatted in hexadecimal
* (For the SAFECOOKIE authentication method; see 3.21)
The HMAC based on the AUTHCHALLENGE message, in hexadecimal.
The server responds with "250 OK" on success or "515 Bad authentication" if the authentication cookie is incorrect. Tor closes the connection on an authentication failure.
The authentication token can be specified as either a quoted ASCII string, or as an unquoted hexadecimal encoding of that same string (to avoid escaping issues).
For information on how the implementation securely stores authentication information on disk, see section 5.1.
Before the client has authenticated, no command other than PROTOCOLINFO, AUTHCHALLENGE, AUTHENTICATE, or QUIT is valid. If the controller sends any other command, or sends a malformed command, or sends an unsuccessful AUTHENTICATE command, or sends PROTOCOLINFO or AUTHCHALLENGE more than once, Tor sends an error reply and closes the connection.
To prevent some cross-protocol attacks, the AUTHENTICATE command is still required even if all authentication methods in Tor are disabled. In this case, the controller should just send "AUTHENTICATE" CRLF.
(Versions of Tor before 0.1.2.16 and 0.2.0.4-alpha did not close the connection after an authentication failure.)
SAVECONF
Sent from the client to the server. The syntax is:
"SAVECONF" [SP "FORCE"] CRLF
Instructs the server to write out its config options into its torrc. Server returns "250 OK" if successful, or "551 Unable to write configuration to disk" if it can't write the file or some other error occurs.
If the %include option is used on torrc, SAVECONF will not write the configuration to disk. If the flag string "FORCE" is provided, the configuration will be overwritten even if %include is used. Using %include on defaults-torrc does not affect SAVECONF. (Introduced in 0.3.1.1-alpha.)
See also the "getinfo config-text" command, if the controller wants to write the torrc file itself.
See also the "getinfo config-can-saveconf" command, to tell if the FORCE flag will be required. (Also introduced in 0.3.1.1-alpha.)
SIGNAL
Sent from the client to the server. The syntax is:
"SIGNAL" SP Signal CRLF
Signal = "RELOAD" / "SHUTDOWN" / "DUMP" / "DEBUG" / "HALT" /
"HUP" / "INT" / "USR1" / "USR2" / "TERM" / "NEWNYM" /
"CLEARDNSCACHE" / "HEARTBEAT" / "ACTIVE" / "DORMANT"
The meaning of the signals are:
RELOAD -- Reload: reload config items.
SHUTDOWN -- Controlled shutdown: if server is an OP, exit immediately.
If it's an OR, close listeners and exit after
ShutdownWaitLength seconds.
DUMP -- Dump stats: log information about open connections and
circuits.
DEBUG -- Debug: switch all open logs to loglevel debug.
HALT -- Immediate shutdown: clean up and exit now.
CLEARDNSCACHE -- Forget the client-side cached IPs for all hostnames.
NEWNYM -- Switch to clean circuits, so new application requests
don't share any circuits with old ones. Also clears
the client-side DNS cache. (Tor MAY rate-limit its
response to this signal.)
HEARTBEAT -- Make Tor dump an unscheduled Heartbeat message to log.
DORMANT -- Tell Tor to become "dormant". A dormant Tor will
try to avoid CPU and network usage until it receives
user-initiated network request. (Don't use this
on relays or hidden services yet!)
ACTIVE -- Tell Tor to stop being "dormant", as if it had received
a user-initiated network request.
The server responds with "250 OK" if the signal is recognized (or simply closes the socket if it was asked to close immediately), or "552 Unrecognized signal" if the signal is unrecognized.
Note that not all of these signals have POSIX signal equivalents. The ones that do are as below. You may also use these POSIX names for the signal that have them.
RELOAD: HUP
SHUTDOWN: INT
HALT: TERM
DUMP: USR1
DEBUG: USR2
[SIGNAL DORMANT and SIGNAL ACTIVE were added in 0.4.0.1-alpha.]
MAPADDRESS
Sent from the client to the server. The syntax is:
"MAPADDRESS" 1*(Address "=" Address SP) CRLF
The first address in each pair is an "original" address; the second is a "replacement" address. The client sends this message to the server in order to tell it that future SOCKS requests for connections to the original address should be replaced with connections to the specified replacement address. If the addresses are well-formed, and the server is able to fulfill the request, the server replies with a 250 message:
250-OldAddress1=NewAddress1
250 OldAddress2=NewAddress2
containing the source and destination addresses. If request is malformed, the server replies with "512 syntax error in command argument". If the server can't fulfill the request, it replies with "451 resource exhausted".
The client may decline to provide a body for the original address, and instead send a special null address ("0.0.0.0" for IPv4, "::0" for IPv6, or "." for hostname), signifying that the server should choose the original address itself, and return that address in the reply. The server should ensure that it returns an element of address space that is unlikely to be in actual use. If there is already an address mapped to the destination address, the server may reuse that mapping.
If the original address is already mapped to a different address, the old mapping is removed. If the original address and the destination address are the same, the server removes any mapping in place for the original address.
Example:
C: MAPADDRESS 1.2.3.4=torproject.org
S: 250 1.2.3.4=torproject.org
C: GETINFO address-mappings/control
S: 250-address-mappings/control=1.2.3.4 torproject.org NEVER
S: 250 OK
C: MAPADDRESS 1.2.3.4=1.2.3.4
S: 250 1.2.3.4=1.2.3.4
C: GETINFO address-mappings/control
S: 250-address-mappings/control=
S: 250 OK
{Note: This feature is designed to be used to help Tor-ify applications that need to use SOCKS4 or hostname-less SOCKS5. There are three approaches to doing this:
1. Somehow make them use SOCKS4a or SOCKS5-with-hostnames instead.
2. Use tor-resolve (or another interface to Tor's resolve-over-SOCKS
feature) to resolve the hostname remotely. This doesn't work
with special addresses like x.onion or x.y.exit.
3. Use MAPADDRESS to map an IP address to the desired hostname, and then
arrange to fool the application into thinking that the hostname
has resolved to that IP.
This functionality is designed to help implement the 3rd approach.}
Mappings set by the controller last until the Tor process exits: they never expire. If the controller wants the mapping to last only a certain time, then it must explicitly un-map the address when that time has elapsed.
MapAddress replies MAY contain mixed status codes.
Example:
C: MAPADDRESS xxx=@@@ 0.0.0.0=bogus1.google.com
S: 512-syntax error: invalid address '@@@'
S: 250 127.199.80.246=bogus1.google.com
GETINFO
Sent from the client to the server. The syntax is as for GETCONF:
"GETINFO" 1*(SP keyword) CRLF
Unlike GETCONF, this message is used for data that are not stored in the Tor configuration file, and that may be longer than a single line. On success, one ReplyLine is sent for each requested value, followed by a final 250 OK ReplyLine. If a value fits on a single line, the format is:
250-keyword=value
If a value must be split over multiple lines, the format is:
250+keyword=
value
.
The server sends a 551 or 552 error on failure.
Recognized keys and their values include:
"version" -- The version of the server's software, which MAY include the
name of the software, such as "Tor 0.0.9.4". The name of the software,
if absent, is assumed to be "Tor".
"config-file" -- The location of Tor's configuration file ("torrc").
"config-defaults-file" -- The location of Tor's configuration
defaults file ("torrc.defaults"). This file gets parsed before
torrc, and is typically used to replace Tor's default
configuration values. [First implemented in 0.2.3.9-alpha.]
"config-text" -- The contents that Tor would write if you send it
a SAVECONF command, so the controller can write the file to
disk itself. [First implemented in 0.2.2.7-alpha.]
"exit-policy/default" -- The default exit policy lines that Tor will
*append* to the ExitPolicy config option.
"exit-policy/reject-private/default" -- The default exit policy lines
that Tor will *prepend* to the ExitPolicy config option when
ExitPolicyRejectPrivate is 1.
"exit-policy/reject-private/relay" -- The relay-specific exit policy
lines that Tor will *prepend* to the ExitPolicy config option based
on the current values of ExitPolicyRejectPrivate and
ExitPolicyRejectLocalInterfaces. These lines are based on the public
addresses configured in the torrc and present on the relay's
interfaces. Will send 552 error if the server is not running as
onion router. Will send 551 on internal error which may be transient.
"exit-policy/ipv4"
"exit-policy/ipv6"
"exit-policy/full" -- This OR's exit policy, in IPv4-only, IPv6-only, or
all-entries flavors. Handles errors in the same way as "exit-policy/
reject-private/relay" does.
"desc/id/<OR identity>" or "desc/name/<OR nickname>" -- the latest
server descriptor for a given OR. (Note that modern Tor clients
do not download server descriptors by default, but download
microdescriptors instead. If microdescriptors are enabled, you'll
need to use "md" instead.)
"md/all" -- all known microdescriptors for the entire Tor network.
Each microdescriptor is terminated by a newline.
[First implemented in 0.3.5.1-alpha]
"md/id/<OR identity>" or "md/name/<OR nickname>" -- the latest
microdescriptor for a given OR. Empty if we have no microdescriptor for
that OR (because we haven't downloaded one, or it isn't in the
consensus). [First implemented in 0.2.3.8-alpha.]
"desc/download-enabled" -- "1" if we try to download router descriptors;
"0" otherwise. [First implemented in 0.3.2.1-alpha]
"md/download-enabled" -- "1" if we try to download microdescriptors;
"0" otherwise. [First implemented in 0.3.2.1-alpha]
"dormant" -- A nonnegative integer: zero if Tor is currently active and
building circuits, and nonzero if Tor has gone idle due to lack of use
or some similar reason. [First implemented in 0.2.3.16-alpha]
"desc-annotations/id/<OR identity>" -- outputs the annotations string
(source, timestamp of arrival, purpose, etc) for the corresponding
descriptor. [First implemented in 0.2.0.13-alpha.]
"extra-info/digest/<digest>" -- the extrainfo document whose digest (in
hex) is <digest>. Only available if we're downloading extra-info
documents.
"ns/id/<OR identity>" or "ns/name/<OR nickname>" -- the latest router
status info (v3 directory style) for a given OR. Router status
info is as given in dir-spec.txt, and reflects the latest
consensus opinion about the
router in question. Like directory clients, controllers MUST
tolerate unrecognized flags and lines. The published date and
descriptor digest are those believed to be best by this Tor,
not necessarily those for a descriptor that Tor currently has.
[First implemented in 0.1.2.3-alpha.]
[In 0.2.0.9-alpha this switched from v2 directory style to v3]
"ns/all" -- Router status info (v3 directory style) for all ORs we
that the consensus has an opinion about, joined by newlines.
[First implemented in 0.1.2.3-alpha.]
[In 0.2.0.9-alpha this switched from v2 directory style to v3]
"ns/purpose/<purpose>" -- Router status info (v3 directory style)
for all ORs of this purpose. Mostly designed for /ns/purpose/bridge
queries.
[First implemented in 0.2.0.13-alpha.]
[In 0.2.0.9-alpha this switched from v2 directory style to v3]
[In versions before 0.4.1.1-alpha we set the Running flag on
bridges when /ns/purpose/bridge is accessed]
[In 0.4.1.1-alpha we set the Running flag on bridges when the
bridge networkstatus file is written to disk]
"desc/all-recent" -- the latest server descriptor for every router that
Tor knows about. (See md note about "desc/id" and "desc/name" above.)
"network-status" -- [Deprecated in 0.3.1.1-alpha, removed
in 0.4.5.1-alpha.]
"address-mappings/all"
"address-mappings/config"
"address-mappings/cache"
"address-mappings/control" -- a \r\n-separated list of address
mappings, each in the form of "from-address to-address expiry".
The 'config' key returns those address mappings set in the
configuration; the 'cache' key returns the mappings in the
client-side DNS cache; the 'control' key returns the mappings set
via the control interface; the 'all' target returns the mappings
set through any mechanism.
Expiry is formatted as with ADDRMAP events, except that "expiry" is
always a time in UTC or the string "NEVER"; see section 4.1.7.
First introduced in 0.2.0.3-alpha.
"addr-mappings/*" -- as for address-mappings/*, but without the
expiry portion of the value. Use of this value is deprecated
since 0.2.0.3-alpha; use address-mappings instead.
"address" -- the best guess at our external IP address. If we
have no guess, return a 551 error. (Added in 0.1.2.2-alpha)
"address/v4"
"address/v6"
the best guess at our respective external IPv4 or IPv6 address.
If we have no guess, return a 551 error. (Added in 0.4.5.1-alpha)
"fingerprint" -- the contents of the fingerprint file that Tor
writes as a relay, or a 551 if we're not a relay currently.
(Added in 0.1.2.3-alpha)
"circuit-status"
A series of lines as for a circuit status event. Each line is of
the form described in section 4.1.1, omitting the initial
"650 CIRC ". Note that clients must be ready to accept additional
arguments as described in section 4.1.
"stream-status"
A series of lines as for a stream status event. Each is of the form:
StreamID SP StreamStatus SP CircuitID SP Target CRLF
"orconn-status"
A series of lines as for an OR connection status event. In Tor
0.1.2.2-alpha with feature VERBOSE_NAMES enabled and in Tor
0.2.2.1-alpha and later by default, each line is of the form:
LongName SP ORStatus CRLF
In Tor versions 0.1.2.2-alpha through 0.2.2.1-alpha with feature
VERBOSE_NAMES turned off and before version 0.1.2.2-alpha, each line
is of the form:
ServerID SP ORStatus CRLF
"entry-guards"
A series of lines listing the currently chosen entry guards, if any.
In Tor 0.1.2.2-alpha with feature VERBOSE_NAMES enabled and in Tor
0.2.2.1-alpha and later by default, each line is of the form:
LongName SP Status [SP ISOTime] CRLF
In Tor versions 0.1.2.2-alpha through 0.2.2.1-alpha with feature
VERBOSE_NAMES turned off and before version 0.1.2.2-alpha, each line
is of the form:
ServerID2 SP Status [SP ISOTime] CRLF
ServerID2 = Nickname / 40*HEXDIG
The definition of Status is the same for both:
Status = "up" / "never-connected" / "down" /
"unusable" / "unlisted"
[From 0.1.1.4-alpha to 0.1.1.10-alpha, entry-guards was called
"helper-nodes". Tor still supports calling "helper-nodes", but it
is deprecated and should not be used.]
[Older versions of Tor (before 0.1.2.x-final) generated 'down' instead
of unlisted/unusable. Between 0.1.2.x-final and 0.2.6.3-alpha,
'down' was never generated.]
[XXXX ServerID2 differs from ServerID in not prefixing fingerprints
with a $. This is an implementation error. It would be nice to add
the $ back in if we can do so without breaking compatibility.]
"traffic/read" -- Total bytes read (downloaded).
"traffic/written" -- Total bytes written (uploaded).
"uptime" -- Uptime of the Tor daemon (in seconds). Added in
0.3.5.1-alpha.
"accounting/enabled"
"accounting/hibernating"
"accounting/bytes"
"accounting/bytes-left"
"accounting/interval-start"
"accounting/interval-wake"
"accounting/interval-end"
Information about accounting status. If accounting is enabled,
"enabled" is 1; otherwise it is 0. The "hibernating" field is "hard"
if we are accepting no data; "soft" if we're accepting no new
connections, and "awake" if we're not hibernating at all. The "bytes"
and "bytes-left" fields contain (read-bytes SP write-bytes), for the
start and the rest of the interval respectively. The 'interval-start'
and 'interval-end' fields are the borders of the current interval; the
'interval-wake' field is the time within the current interval (if any)
where we plan[ned] to start being active. The times are UTC.
"config/names"
A series of lines listing the available configuration options. Each is
of the form:
OptionName SP OptionType [ SP Documentation ] CRLF
OptionName = Keyword
OptionType = "Integer" / "TimeInterval" / "TimeMsecInterval" /
"DataSize" / "Float" / "Boolean" / "Time" / "CommaList" /
"Dependent" / "Virtual" / "String" / "LineList"
Documentation = Text
Note: The incorrect spelling "Dependant" was used from the time this key
was introduced in Tor 0.1.1.4-alpha until it was corrected in Tor
0.3.0.2-alpha. It is recommended that clients accept both spellings.
"config/defaults"
A series of lines listing default values for each configuration
option. Options which don't have a valid default don't show up
in the list. Introduced in Tor 0.2.4.1-alpha.
OptionName SP OptionValue CRLF
OptionName = Keyword
OptionValue = Text
"info/names"
A series of lines listing the available GETINFO options. Each is of
one of these forms:
OptionName SP Documentation CRLF
OptionPrefix SP Documentation CRLF
OptionPrefix = OptionName "/*"
The OptionPrefix form indicates a number of options beginning with the
prefix. So if "config/*" is listed, other options beginning with
"config/" will work, but "config/*" itself is not an option.
"events/names"
A space-separated list of all the events supported by this version of
Tor's SETEVENTS.
"features/names"
A space-separated list of all the features supported by this version
of Tor's USEFEATURE.
"signal/names"
A space-separated list of all the values supported by the SIGNAL
command.
"ip-to-country/ipv4-available"
"ip-to-country/ipv6-available"
"1" if the relevant geoip or geoip6 database is present; "0" otherwise.
This field was added in Tor 0.3.2.1-alpha.
"ip-to-country/*"
Maps IP addresses to 2-letter country codes. For example,
"GETINFO ip-to-country/18.0.0.1" should give "US".
"process/pid" -- Process id belonging to the main tor process.
"process/uid" -- User id running the tor process, -1 if unknown (this is
unimplemented on Windows, returning -1).
"process/user" -- Username under which the tor process is running,
providing an empty string if none exists (this is unimplemented on
Windows, returning an empty string).
"process/descriptor-limit" -- Upper bound on the file descriptor limit, -1
if unknown
"dir/status-vote/current/consensus" [added in Tor 0.2.1.6-alpha]
"dir/status-vote/current/consensus-microdesc" [added in Tor 0.4.3.1-alpha]
"dir/status/authority"
"dir/status/fp/<F>"
"dir/status/fp/<F1>+<F2>+<F3>"
"dir/status/all"
"dir/server/fp/<F>"
"dir/server/fp/<F1>+<F2>+<F3>"
"dir/server/d/<D>"
"dir/server/d/<D1>+<D2>+<D3>"
"dir/server/authority"
"dir/server/all"
A series of lines listing directory contents, provided according to the
specification for the URLs listed in Section 4.4 of dir-spec.txt. Note
that Tor MUST NOT provide private information, such as descriptors for
routers not marked as general-purpose. When asked for 'authority'
information for which this Tor is not authoritative, Tor replies with
an empty string.
Note that, as of Tor 0.2.3.3-alpha, Tor clients don't download server
descriptors anymore, but microdescriptors. So, a "551 Servers
unavailable" reply to all "GETINFO dir/server/*" requests is actually
correct. If you have an old program which absolutely requires server
descriptors to work, try setting UseMicrodescriptors 0 or
FetchUselessDescriptors 1 in your client's torrc.
"status/circuit-established"
"status/enough-dir-info"
"status/good-server-descriptor"
"status/accepted-server-descriptor"
"status/..."
These provide the current internal Tor values for various Tor
states. See Section 4.1.10 for explanations. (Only a few of the
status events are available as getinfo's currently. Let us know if
you want more exposed.)
"status/reachability-succeeded/or"
0 or 1, depending on whether we've found our ORPort reachable.
"status/reachability-succeeded/dir"
0 or 1, depending on whether we've found our DirPort reachable.
1 if there is no DirPort, and therefore no need for a reachability
check.
"status/reachability-succeeded"
"OR=" ("0"/"1") SP "DIR=" ("0"/"1")
Combines status/reachability-succeeded/*; controllers MUST ignore
unrecognized elements in this entry.
"status/bootstrap-phase"
Returns the most recent bootstrap phase status event
sent. Specifically, it returns a string starting with either
"NOTICE BOOTSTRAP ..." or "WARN BOOTSTRAP ...". Controllers should
use this getinfo when they connect or attach to Tor to learn its
current bootstrap state.
"status/version/recommended"
List of currently recommended versions.
"status/version/current"
Status of the current version. One of: new, old, unrecommended,
recommended, new in series, obsolete, unknown.
"status/clients-seen"
A summary of which countries we've seen clients from recently,
formatted the same as the CLIENTS_SEEN status event described in
Section 4.1.14. This GETINFO option is currently available only
for bridge relays.
"status/fresh-relay-descs"
Provides fresh server and extra-info descriptors for our relay. Note
this is *not* the latest descriptors we've published, but rather what we
would generate if we needed to make a new descriptor right now.
"net/listeners/*"
A quoted, space-separated list of the locations where Tor is listening
for connections of the specified type. These can contain IPv4
network address...
"127.0.0.1:9050" "127.0.0.1:9051"
... or local unix sockets...
"unix:/home/my_user/.tor/socket"
... or IPv6 network addresses:
"[2001:0db8:7000:0000:0000:dead:beef:1234]:9050"
[New in Tor 0.2.2.26-beta.]
"net/listeners/or"
Listeners for OR connections. Talks Tor protocol as described in
tor-spec.txt.
"net/listeners/dir"
Listeners for Tor directory protocol, as described in dir-spec.txt.
"net/listeners/socks"
Listeners for onion proxy connections that talk SOCKS4/4a/5 protocol.
"net/listeners/trans"
Listeners for transparent connections redirected by firewall, such as
pf or netfilter.
"net/listeners/natd"
Listeners for transparent connections redirected by natd.
"net/listeners/dns"
Listeners for a subset of DNS protocol that Tor network supports.
"net/listeners/control"
Listeners for Tor control protocol, described herein.
"net/listeners/extor"
Listeners corresponding to Extended ORPorts for integration with
pluggable transports. See proposals 180 and 196.
"net/listeners/httptunnel"
Listeners for onion proxy connections that leverage HTTP CONNECT
tunnelling.
[The extor and httptunnel lists were added in 0.3.2.12, 0.3.3.10, and
0.3.4.6-rc.]
"dir-usage"
A newline-separated list of how many bytes we've served to answer
each type of directory request. The format of each line is:
Keyword 1*SP Integer 1*SP Integer
where the first integer is the number of bytes written, and the second
is the number of requests answered.
[This feature was added in Tor 0.2.2.1-alpha, and removed in
Tor 0.2.9.1-alpha. Even when it existed, it only provided
useful output when the Tor client was built with either the
INSTRUMENT_DOWNLOADS or RUNNING_DOXYGEN compile-time options.]
"bw-event-cache"
A space-separated summary of recent BW events in chronological order
from oldest to newest. Each event is represented by a comma-separated
tuple of "R,W", R is the number of bytes read, and W is the number of
bytes written. These entries each represent about one second's worth
of traffic.
[New in Tor 0.2.6.3-alpha]
"consensus/valid-after"
"consensus/fresh-until"
"consensus/valid-until"
Each of these produces an ISOTime describing part of the lifetime of
the current (valid, accepted) consensus that Tor has.
[New in Tor 0.2.6.3-alpha]
"hs/client/desc/id/<ADDR>"
Prints the content of the hidden service descriptor corresponding to
the given <ADDR> which is an onion address without the ".onion" part.
The client's cache is queried to find the descriptor. The format of
the descriptor is described in section 1.3 of the rend-spec.txt
document.
If <ADDR> is unrecognized or if not found in the cache, a 551 error is
returned.
[New in Tor 0.2.7.1-alpha]
[HS v3 support added 0.3.3.1-alpha]
"hs/service/desc/id/<ADDR>"
Prints the content of the hidden service descriptor corresponding to
the given <ADDR> which is an onion address without the ".onion" part.
The service's local descriptor cache is queried to find the descriptor.
The format of the descriptor is described in section 1.3 of the
rend-spec.txt document.
If <ADDR> is unrecognized or if not found in the cache, a 551 error is
returned.
[New in Tor 0.2.7.2-alpha]
[HS v3 support added 0.3.3.1-alpha]
"onions/current"
"onions/detached"
A newline-separated list of the Onion ("Hidden") Services created
via the "ADD_ONION" command. The 'current' key returns Onion Services
belonging to the current control connection. The 'detached' key
returns Onion Services detached from the parent control connection
(as in, belonging to no control connection).
The format of each line is:
HSAddress
[New in Tor 0.2.7.1-alpha.]
[HS v3 support added 0.3.3.1-alpha]
"network-liveness"
The string "up" or "down", indicating whether we currently believe the
network is reachable.
"downloads/"
The keys under downloads/ are used to query download statuses; they all
return either a sequence of newline-terminated hex encoded digests, or
a "serialized download status" as follows:
SerializedDownloadStatus =
-- when do we plan to next attempt to download this object?
"next-attempt-at" SP ISOTime CRLF
-- how many times have we failed since the last success?
"n-download-failures" SP UInt CRLF
-- how many times have we tried to download this?
"n-download-attempts" SP UInt CRLF
-- according to which schedule rule will we download this?
"schedule" SP DownloadSchedule CRLF
-- do we want to fetch this from an authority, or will any cache do?
"want-authority" SP DownloadWantAuthority CRLF
-- do we increase our download delay whenever we fail to fetch this,
-- or whenever we attempt fetching this?
"increment-on" SP DownloadIncrementOn CRLF
-- do we increase the download schedule deterministically, or at
-- random?
"backoff" SP DownloadBackoff CRLF
[
-- with an exponential backoff, where are we in the schedule?
"last-backoff-position" Uint CRLF
-- with an exponential backoff, what was our last delay?
"last-delay-used UInt CRLF
]
where
DownloadSchedule =
"DL_SCHED_GENERIC" / "DL_SCHED_CONSENSUS" / "DL_SCHED_BRIDGE"
DownloadWantAuthority =
"DL_WANT_ANY_DIRSERVER" / "DL_WANT_AUTHORITY"
DownloadIncrementOn =
"DL_SCHED_INCREMENT_FAILURE" / "DL_SCHED_INCREMENT_ATTEMPT"
DownloadBackoff =
"DL_SCHED_DETERMINISTIC" / "DL_SCHED_RANDOM_EXPONENTIAL"
The optional last two lines must be present if DownloadBackoff is
"DL_SCHED_RANDOM_EXPONENTIAL" and must be absent if DownloadBackoff
is "DL_SCHED_DETERMINISTIC".
In detail, the keys supported are:
"downloads/networkstatus/ns"
The SerializedDownloadStatus for the NS-flavored consensus for
whichever bootstrap state Tor is currently in.
"downloads/networkstatus/ns/bootstrap"
The SerializedDownloadStatus for the NS-flavored consensus at
bootstrap time, regardless of whether we are currently bootstrapping.
"downloads/networkstatus/ns/running"
The SerializedDownloadStatus for the NS-flavored consensus when
running, regardless of whether we are currently bootstrapping.
"downloads/networkstatus/microdesc"
The SerializedDownloadStatus for the microdesc-flavored consensus for
whichever bootstrap state Tor is currently in.
"downloads/networkstatus/microdesc/bootstrap"
The SerializedDownloadStatus for the microdesc-flavored consensus at
bootstrap time, regardless of whether we are currently bootstrapping.
"downloads/networkstatus/microdesc/running"
The SerializedDownloadStatus for the microdesc-flavored consensus when
running, regardless of whether we are currently bootstrapping.
"downloads/cert/fps"
A newline-separated list of hex-encoded digests for authority
certificates for which we have download status available.
"downloads/cert/fp/<Fingerprint>"
A SerializedDownloadStatus for the default certificate for the
identity digest <Fingerprint> returned by the downloads/cert/fps key.
"downloads/cert/fp/<Fingerprint>/sks"
A newline-separated list of hex-encoded signing key digests for the
authority identity digest <Fingerprint> returned by the
downloads/cert/fps key.
"downloads/cert/fp/<Fingerprint>/<SKDigest>"
A SerializedDownloadStatus for the certificate for the identity
digest <Fingerprint> returned by the downloads/cert/fps key and signing
key digest <SKDigest> returned by the downloads/cert/fp/<Fingerprint>/
sks key.
"downloads/desc/descs"
A newline-separated list of hex-encoded router descriptor digests
[note, not identity digests - the Tor process may not have seen them
yet while downloading router descriptors]. If the Tor process is not
using a NS-flavored consensus, a 551 error is returned.
"downloads/desc/<Digest>"
A SerializedDownloadStatus for the router descriptor with digest
<Digest> as returned by the downloads/desc/descs key. If the Tor
process is not using a NS-flavored consensus, a 551 error is returned.
"downloads/bridge/bridges"
A newline-separated list of hex-encoded bridge identity digests. If
the Tor process is not using bridges, a 551 error is returned.
"downloads/bridge/<Digest>"
A SerializedDownloadStatus for the bridge descriptor with identity
digest <Digest> as returned by the downloads/bridge/bridges key. If
the Tor process is not using bridges, a 551 error is returned.
"sr/current"
"sr/previous"
The current or previous shared random value, as received in the
consensus, base-64 encoded. An empty value means that either
the consensus has no shared random value, or Tor has no consensus.
"current-time/local"
"current-time/utc"
The current system or UTC time, as returned by the system, in ISOTime2
format. (Introduced in 0.3.4.1-alpha.)
"stats/ntor/requested"
"stats/ntor/assigned"
The NTor circuit onion handshake rephist values which are requested or
assigned. (Introduced in 0.4.5.1-alpha)
"stats/tap/requested"
"stats/tap/assigned"
The TAP circuit onion handshake rephist values which are requested or
assigned. (Introduced in 0.4.5.1-alpha)
"config-can-saveconf"
0 or 1, depending on whether it is possible to use SAVECONF without the
FORCE flag. (Introduced in 0.3.1.1-alpha.)
"limits/max-mem-in-queues"
The amount of memory that Tor's out-of-memory checker will allow
Tor to allocate (in places it can see) before it starts freeing memory
and killing circuits. See the MaxMemInQueues option for more
details. Unlike the option, this value reflects Tor's actual limit, and
may be adjusted depending on the available system memory rather than on
the MaxMemInQueues option. (Introduced in 0.2.5.4-alpha)
Examples:
C: GETINFO version desc/name/moria1
S: 250+desc/name/moria=
S: [Descriptor for moria]
S: .
S: 250-version=Tor 0.1.1.0-alpha-cvs
S: 250 OK
EXTENDCIRCUIT
Sent from the client to the server. The format is:
"EXTENDCIRCUIT" SP CircuitID
[SP ServerSpec *("," ServerSpec)]
[SP "purpose=" Purpose] CRLF
This request takes one of two forms: either the CircuitID is zero, in which case it is a request for the server to build a new circuit, or the CircuitID is nonzero, in which case it is a request for the server to extend an existing circuit with that ID according to the specified path.
If the CircuitID is 0, the controller has the option of providing a path for Tor to use to build the circuit. If it does not provide a path, Tor will select one automatically from high capacity nodes according to path-spec.txt.
If CircuitID is 0 and "purpose=" is specified, then the circuit's purpose is set. Two choices are recognized: "general" and "controller". If not specified, circuits are created as "general".
If the request is successful, the server sends a reply containing a message body consisting of the CircuitID of the (maybe newly created) circuit. The syntax is "250" SP "EXTENDED" SP CircuitID CRLF.
SETCIRCUITPURPOSE
Sent from the client to the server. The format is:
"SETCIRCUITPURPOSE" SP CircuitID SP "purpose=" Purpose CRLF
This changes the circuit's purpose. See EXTENDCIRCUIT above for details.
SETROUTERPURPOSE
Sent from the client to the server. The format is:
"SETROUTERPURPOSE" SP NicknameOrKey SP Purpose CRLF
This changes the descriptor's purpose. See +POSTDESCRIPTOR below for details.
NOTE: This command was disabled and made obsolete as of Tor 0.2.0.8-alpha. It doesn't exist anymore, and is listed here only for historical interest.
ATTACHSTREAM
Sent from the client to the server. The syntax is:
"ATTACHSTREAM" SP StreamID SP CircuitID [SP "HOP=" HopNum] CRLF
This message informs the server that the specified stream should be associated with the specified circuit. Each stream may be associated with at most one circuit, and multiple streams may share the same circuit. Streams can only be attached to completed circuits (that is, circuits that have sent a circuit status 'BUILT' event or are listed as built in a GETINFO circuit-status request).
If the circuit ID is 0, responsibility for attaching the given stream is returned to Tor.
If HOP=HopNum is specified, Tor will choose the HopNumth hop in the circuit as the exit node, rather than the last node in the circuit. Hops are 1-indexed; generally, it is not permitted to attach to hop 1.
Tor responds with "250 OK" if it can attach the stream, 552 if the circuit or stream didn't exist, 555 if the stream isn't in an appropriate state to be attached (e.g. it's already open), or 551 if the stream couldn't be attached for another reason.
{Implementation note: Tor will close unattached streams by itself, roughly two minutes after they are born. Let the developers know if that turns out to be a problem.}
{Implementation note: By default, Tor automatically attaches streams to circuits itself, unless the configuration variable "__LeaveStreamsUnattached" is set to "1". Attempting to attach streams via TC when "__LeaveStreamsUnattached" is false may cause a race between Tor and the controller, as both attempt to attach streams to circuits.}
{Implementation note: You can try to attachstream to a stream that has already sent a connect or resolve request but hasn't succeeded yet, in which case Tor will detach the stream from its current circuit before proceeding with the new attach request.}
POSTDESCRIPTOR
Sent from the client to the server. The syntax is:
"+POSTDESCRIPTOR" [SP "purpose=" Purpose] [SP "cache=" Cache]
CRLF Descriptor CRLF "." CRLF
This message informs the server about a new descriptor. If Purpose is specified, it must be either "general", "controller", or "bridge", else we return a 552 error. The default is "general".
If Cache is specified, it must be either "no" or "yes", else we return a 552 error. If Cache is not specified, Tor will decide for itself whether it wants to cache the descriptor, and controllers must not rely on its choice.
The descriptor, when parsed, must contain a number of well-specified fields, including fields for its nickname and identity.
If there is an error in parsing the descriptor, the server must send a "554 Invalid descriptor" reply. If the descriptor is well-formed but the server chooses not to add it, it must reply with a 251 message whose body explains why the server was not added. If the descriptor is added, Tor replies with "250 OK".
REDIRECTSTREAM
Sent from the client to the server. The syntax is:
"REDIRECTSTREAM" SP StreamID SP Address [SP Port] CRLF
Tells the server to change the exit address on the specified stream. If Port is specified, changes the destination port as well. No remapping is performed on the new provided address.
To be sure that the modified address will be used, this event must be sent after a new stream event is received, and before attaching this stream to a circuit.
Tor replies with "250 OK" on success.
CLOSESTREAM
Sent from the client to the server. The syntax is:
"CLOSESTREAM" SP StreamID SP Reason *(SP Flag) CRLF
Tells the server to close the specified stream. The reason should be one of the Tor RELAY_END reasons given in tor-spec.txt, as a decimal. Flags is not used currently; Tor servers SHOULD ignore unrecognized flags. Tor may hold the stream open for a while to flush any data that is pending.
Tor replies with "250 OK" on success, or a 512 if there aren't enough arguments, or a 552 if it doesn't recognize the StreamID or reason.
CLOSECIRCUIT
The syntax is:
"CLOSECIRCUIT" SP CircuitID *(SP Flag) CRLF
Flag = "IfUnused"
Tells the server to close the specified circuit. If "IfUnused" is provided, do not close the circuit unless it is unused.
Other flags may be defined in the future; Tor SHOULD ignore unrecognized flags.
Tor replies with "250 OK" on success, or a 512 if there aren't enough arguments, or a 552 if it doesn't recognize the CircuitID.
QUIT
Tells the server to hang up on this controller connection. This command can be used before authenticating.
USEFEATURE
Adding additional features to the control protocol sometimes will break backwards compatibility. Initially such features are added into Tor and disabled by default. USEFEATURE can enable these additional features.
The syntax is:
"USEFEATURE" *(SP FeatureName) CRLF
FeatureName = 1*(ALPHA / DIGIT / "_" / "-")
Feature names are case-insensitive.
Once enabled, a feature stays enabled for the duration of the connection to the controller. A new connection to the controller must be opened to disable an enabled feature.
Features are a forward-compatibility mechanism; each feature will eventually become a standard part of the control protocol. Once a feature becomes part of the protocol, it is always-on. Each feature documents the version it was introduced as a feature and the version in which it became part of the protocol.
Tor will ignore a request to use any feature that is always-on. Tor will give a 552 error in response to an unrecognized feature.
EXTENDED_EVENTS
Same as passing 'EXTENDED' to SETEVENTS; this is the preferred way to
request the extended event syntax.
This feature was first introduced in 0.1.2.3-alpha. It is always-on
and part of the protocol in Tor 0.2.2.1-alpha and later.
VERBOSE_NAMES
Replaces ServerID with LongName in events and GETINFO results. LongName
provides a Fingerprint for all routers, an indication of Named status,
and a Nickname if one is known. LongName is strictly more informative
than ServerID, which only provides either a Fingerprint or a Nickname.
This feature was first introduced in 0.1.2.2-alpha. It is always-on and
part of the protocol in Tor 0.2.2.1-alpha and later.
RESOLVE
The syntax is
"RESOLVE" *Option *Address CRLF
Option = "mode=reverse"
Address = a hostname or IPv4 address
This command launches a remote hostname lookup request for every specified request (or reverse lookup if "mode=reverse" is specified). Note that the request is done in the background: to see the answers, your controller will need to listen for ADDRMAP events; see 4.1.7 below.
[Added in Tor 0.2.0.3-alpha]
PROTOCOLINFO
The syntax is:
"PROTOCOLINFO" *(SP PIVERSION) CRLF
The server reply format is:
"250-PROTOCOLINFO" SP PIVERSION CRLF *InfoLine "250 OK" CRLF
InfoLine = AuthLine / VersionLine / OtherLine
AuthLine = "250-AUTH" SP "METHODS=" AuthMethod *("," AuthMethod)
*(SP "COOKIEFILE=" AuthCookieFile) CRLF
VersionLine = "250-VERSION" SP "Tor=" TorVersion OptArguments CRLF
AuthMethod =
"NULL" / ; No authentication is required
"HASHEDPASSWORD" / ; A controller must supply the original password
"COOKIE" / ; ... or supply the contents of a cookie file
"SAFECOOKIE" ; ... or prove knowledge of a cookie file's contents
AuthCookieFile = QuotedString
TorVersion = QuotedString
OtherLine = "250-" Keyword OptArguments CRLF
PIVERSION: 1*DIGIT
This command tells the controller what kinds of authentication are supported.
Tor MAY give its InfoLines in any order; controllers MUST ignore InfoLines with keywords they do not recognize. Controllers MUST ignore extraneous data on any InfoLine.
PIVERSION is there in case we drastically change the syntax one day. For now it should always be "1". Controllers MAY provide a list of the protocolinfo versions they support; Tor MAY select a version that the controller does not support.
AuthMethod is used to specify one or more control authentication methods that Tor currently accepts.
AuthCookieFile specifies the absolute path and filename of the authentication cookie that Tor is expecting and is provided iff the METHODS field contains the method "COOKIE" and/or "SAFECOOKIE". Controllers MUST handle escape sequences inside this string.
All authentication cookies are 32 bytes long. Controllers MUST NOT use the contents of a non-32-byte-long file as an authentication cookie.
If the METHODS field contains the method "SAFECOOKIE", every AuthCookieFile must contain the same authentication cookie.
The COOKIE authentication method exposes the user running a controller to an unintended information disclosure attack whenever the controller has greater filesystem read access than the process that it has connected to. (Note that a controller may connect to a process other than Tor.) It is almost never safe to use, even if the controller's user has explicitly specified which filename to read an authentication cookie from. For this reason, the COOKIE authentication method has been deprecated and will be removed from a future version of Tor.
The VERSION line contains the Tor version.
[Unlike other commands besides AUTHENTICATE, PROTOCOLINFO may be used (but only once!) before AUTHENTICATE.]
[PROTOCOLINFO was not supported before Tor 0.2.0.5-alpha.]
LOADCONF
The syntax is:
"+LOADCONF" CRLF ConfigText CRLF "." CRLF
This command allows a controller to upload the text of a config file to Tor over the control port. This config file is then loaded as if it had been read from disk.
[LOADCONF was added in Tor 0.2.1.1-alpha.]
TAKEOWNERSHIP
The syntax is:
"TAKEOWNERSHIP" CRLF
This command instructs Tor to shut down when this control connection is closed. This command affects each control connection that sends it independently; if multiple control connections send the TAKEOWNERSHIP command to a Tor instance, Tor will shut down when any of those connections closes.
(As of Tor 0.2.5.2-alpha, Tor does not wait a while for circuits to close when shutting down because of an exiting controller. If you want to ensure a clean shutdown--and you should!--then send "SIGNAL SHUTDOWN" and wait for the Tor process to close.)
This command is intended to be used with the __OwningControllerProcess configuration option. A controller that starts a Tor process which the user cannot easily control or stop should 'own' that Tor process:
* When starting Tor, the controller should specify its PID in an
__OwningControllerProcess on Tor's command line. This will
cause Tor to poll for the existence of a process with that PID,
and exit if it does not find such a process. (This is not a
completely reliable way to detect whether the 'owning
controller' is still running, but it should work well enough in
most cases.)
* Once the controller has connected to Tor's control port, it
should send the TAKEOWNERSHIP command along its control
connection. At this point, *both* the TAKEOWNERSHIP command and
the __OwningControllerProcess option are in effect: Tor will
exit when the control connection ends *and* Tor will exit if it
detects that there is no process with the PID specified in the
__OwningControllerProcess option.
* After the controller has sent the TAKEOWNERSHIP command, it
should send "RESETCONF __OwningControllerProcess" along its
control connection. This will cause Tor to stop polling for the
existence of a process with its owning controller's PID; Tor
will still exit when the control connection ends.
[TAKEOWNERSHIP was added in Tor 0.2.2.28-beta.]
AUTHCHALLENGE
The syntax is:
"AUTHCHALLENGE" SP "SAFECOOKIE"
SP ClientNonce
CRLF
ClientNonce = 2*HEXDIG / QuotedString
This command is used to begin the authentication routine for the SAFECOOKIE method of authentication.
If the server accepts the command, the server reply format is:
"250 AUTHCHALLENGE"
SP "SERVERHASH=" ServerHash
SP "SERVERNONCE=" ServerNonce
CRLF
ServerHash = 64*64HEXDIG
ServerNonce = 64*64HEXDIG
The ClientNonce, ServerHash, and ServerNonce values are encoded/decoded in the same way as the argument passed to the AUTHENTICATE command. ServerNonce MUST be 32 bytes long.
ServerHash is computed as:
HMAC-SHA256("Tor safe cookie authentication server-to-controller hash",
CookieString | ClientNonce | ServerNonce)
(with the HMAC key as its first argument)
After a controller sends a successful AUTHCHALLENGE command, the next command sent on the connection must be an AUTHENTICATE command, and the only authentication string which that AUTHENTICATE command will accept is:
HMAC-SHA256("Tor safe cookie authentication controller-to-server hash",
CookieString | ClientNonce | ServerNonce)
[Unlike other commands besides AUTHENTICATE, AUTHCHALLENGE may be used (but only once!) before AUTHENTICATE.]
[AUTHCHALLENGE was added in Tor 0.2.3.13-alpha.]
DROPGUARDS
The syntax is:
"DROPGUARDS" CRLF
Tells the server to drop all guard nodes. Do not invoke this command lightly; it can increase vulnerability to tracking attacks over time.
Tor replies with "250 OK" on success.
[DROPGUARDS was added in Tor 0.2.5.2-alpha.]
HSFETCH
The syntax is:
"HSFETCH" SP (HSAddress / "v" Version "-" DescId)
*[SP "SERVER=" Server] CRLF
HSAddress = 16*Base32Character / 56*Base32Character
Version = "2" / "3"
DescId = 32*Base32Character
Server = LongName
This command launches hidden service descriptor fetch(es) for the given HSAddress or DescId.
HSAddress can be version 2 or version 3 addresses. DescIDs can only be version 2 IDs. Version 2 addresses consist of 16Base32Character and version 3 addresses consist of 56Base32Character.
If a DescId is specified, at least one Server MUST also be provided, otherwise a 512 error is returned. If no DescId and Server(s) are specified, it behaves like a normal Tor client descriptor fetch. If one or more Server are given, they are used instead triggering a fetch on each of them in parallel.
The caching behavior when fetching a descriptor using this command is identical to normal Tor client behavior.
Details on how to compute a descriptor id (DescId) can be found in rend-spec.txt section 1.3.
If any values are unrecognized, a 513 error is returned and the command is stopped. On success, Tor replies "250 OK" then Tor MUST eventually follow this with both a HS_DESC and HS_DESC_CONTENT events with the results. If SERVER is specified then events are emitted for each location.
Examples are:
C: HSFETCH v2-gezdgnbvgy3tqolbmjrwizlgm5ugs2tl
SERVER=9695DFC35FFEB861329B9F1AB04C46397020CE31
S: 250 OK
C: HSFETCH ajkhdsfuygaesfaa
S: 250 OK
C: HSFETCH vww6ybal4bd7szmgncyruucpgfkqahzddi37ktceo3ah7ngmcopnpyyd
S: 250 OK
[HSFETCH was added in Tor 0.2.7.1-alpha] [HS v3 support added 0.4.1.1-alpha]
ADD_ONION
The syntax is:
"ADD_ONION" SP KeyType ":" KeyBlob
[SP "Flags=" Flag *("," Flag)]
[SP "MaxStreams=" NumStreams]
1*(SP "Port=" VirtPort ["," Target])
*(SP "ClientAuth=" ClientName [":" ClientBlob]) CRLF
*(SP "ClientAuthV3=" V3Key) CRLF
KeyType =
"NEW" / ; The server should generate a key of algorithm KeyBlob
"RSA1024" / ; The server should use the 1024 bit RSA key provided
in as KeyBlob (v2).
"ED25519-V3"; The server should use the ed25519 v3 key provided in as
KeyBlob (v3).
KeyBlob =
"BEST" / ; The server should generate a key using the "best"
supported algorithm (KeyType == "NEW").
[As of 0.4.2.3-alpha, ED25519-V3 is used]
"RSA1024" / ; The server should generate a 1024 bit RSA key
(KeyType == "NEW") (v2).
"ED25519-V3"; The server should generate an ed25519 private key
(KeyType == "NEW") (v3).
String ; A serialized private key (without whitespace)
Flag =
"DiscardPK" / ; The server should not include the newly generated
private key as part of the response.
"Detach" / ; Do not associate the newly created Onion Service
to the current control connection.
"BasicAuth" / ; Client authorization is required using the "basic"
method (v2 only).
"V3Auth" / ; Version 3 client authorization is required (v3 only).
"NonAnonymous" /; Add a non-anonymous Single Onion Service. Tor
checks this flag matches its configured hidden
service anonymity mode.
"MaxStreamsCloseCircuit"; Close the circuit is the maximum streams
allowed is reached.
NumStreams = A value between 0 and 65535 which is used as the maximum
streams that can be attached on a rendezvous circuit. Setting
it to 0 means unlimited which is also the default behavior.
VirtPort = The virtual TCP Port for the Onion Service (As in the
HiddenServicePort "VIRTPORT" argument).
Target = The (optional) target for the given VirtPort (As in the
optional HiddenServicePort "TARGET" argument).
ClientName = An identifier 1 to 16 characters long, using only
characters in A-Za-z0-9+-_ (no spaces) (v2 only).
ClientBlob = Authorization data for the client, in an opaque format
specific to the authorization method (v2 only).
V3Key = The client's base32-encoded x25519 public key, using only the key
part of rend-spec-v3.txt section G.1.2 (v3 only).
The server reply format is:
"250-ServiceID=" ServiceID CRLF
["250-PrivateKey=" KeyType ":" KeyBlob CRLF]
*("250-ClientAuth=" ClientName ":" ClientBlob CRLF)
"250 OK" CRLF
ServiceID = The Onion Service address without the trailing ".onion"
suffix
Tells the server to create a new Onion ("Hidden") Service, with the specified private key and algorithm. If a KeyType of "NEW" is selected, the server will generate a new keypair using the selected algorithm. The "Port" argument's VirtPort and Target values have identical semantics to the corresponding HiddenServicePort configuration values.
The server response will only include a private key if the server was requested to generate a new keypair, and also the "DiscardPK" flag was not specified. (Note that if "DiscardPK" flag is specified, there is no way to recreate the generated keypair and the corresponding Onion Service at a later date).
If client authorization is enabled using the "BasicAuth" flag (which is v2 only), the service will not be accessible to clients without valid authorization data (configured with the "HidServAuth" option). The list of authorized clients is specified with one or more "ClientAuth" parameters. If "ClientBlob" is not specified for a client, a new credential will be randomly generated and returned.
Tor instances can either be in anonymous hidden service mode, or non-anonymous single onion service mode. All hidden services on the same tor instance have the same anonymity. To guard against unexpected loss of anonymity, Tor checks that the ADD_ONION "NonAnonymous" flag matches the current hidden service anonymity mode. The hidden service anonymity mode is configured using the Tor options HiddenServiceSingleHopMode and HiddenServiceNonAnonymousMode. If both these options are 1, the "NonAnonymous" flag must be provided to ADD_ONION. If both these options are 0 (the Tor default), the flag must NOT be provided.
Once created the new Onion Service will remain active until either the Onion Service is removed via "DEL_ONION", the server terminates, or the control connection that originated the "ADD_ONION" command is closed. It is possible to override disabling the Onion Service on control connection close by specifying the "Detach" flag.
It is the Onion Service server application's responsibility to close existing client connections if desired after the Onion Service is removed.
(The KeyBlob format is left intentionally opaque, however for "RSA1024" keys it is currently the Base64 encoded DER representation of a PKCS#1 RSAPrivateKey, with all newlines removed. For a "ED25519-V3" key is the Base64 encoding of the concatenation of the 32-byte ed25519 secret scalar in little-endian and the 32-byte ed25519 PRF secret.)
[Note: The ED25519-V3 format is not the same as, e.g., SUPERCOP ed25519/ref, which stores the concatenation of the 32-byte ed25519 hash seed concatenated with the 32-byte public key, and which derives the secret scalar and PRF secret by expanding the hash seed with SHA-512. Our key blinding scheme is incompatible with storing private keys as seeds, so we store the secret scalar alongside the PRF secret, and just pay the cost of recomputing the public key when importing an ED25519-V3 key.]
Examples:
C: ADD_ONION NEW:BEST Flags=DiscardPK Port=80
S: 250-ServiceID=exampleoniont2pqglbny66wpovyvao3ylc23eileodtevc4b75ikpad
S: 250 OK
C: ADD_ONION RSA1024:[Blob Redacted] Port=80,192.168.1.1:8080
S: 250-ServiceID=sampleonion12456
S: 250 OK
C: ADD_ONION NEW:BEST Port=22 Port=80,8080
S: 250-ServiceID=sampleonion4t2pqglbny66wpovyvao3ylc23eileodtevc4b75ikpad
S: 250-PrivateKey=ED25519-V3:[Blob Redacted]
S: 250 OK
C: ADD_ONION NEW:RSA1024 Flags=DiscardPK,BasicAuth Port=22
ClientAuth=alice:[Blob Redacted] ClientAuth=bob
S: 250-ServiceID=testonion1234567
S: 250-ClientAuth=bob:[Blob Redacted]
S: 250 OK
C: ADD_ONION NEW:ED25519-V3 ClientAuthV3=[Blob Redacted] Port=22
S: 250-ServiceID=n35etu3yjxrqjpntmfziom5sjwspoydchmelc4xleoy4jk2u4lziz2yd
S: 250-ClientAuthV3=[Blob Redacted]
S: 250 OK
Examples with Tor in anonymous onion service mode:
C: ADD_ONION NEW:BEST Flags=DiscardPK Port=22
S: 250-ServiceID=exampleoniont2pqglbny66wpovyvao3ylc23eileodtevc4b75ikpad
S: 250 OK
C: ADD_ONION NEW:BEST Flags=DiscardPK,NonAnonymous Port=22
S: 512 Tor is in anonymous hidden service mode
Examples with Tor in non-anonymous onion service mode:
C: ADD_ONION NEW:BEST Flags=DiscardPK Port=22
S: 512 Tor is in non-anonymous hidden service mode
C: ADD_ONION NEW:BEST Flags=DiscardPK,NonAnonymous Port=22
S: 250-ServiceID=exampleoniont2pqglbny66wpovyvao3ylc23eileodtevc4b75ikpad
S: 250 OK
[ADD_ONION was added in Tor 0.2.7.1-alpha.] [MaxStreams and MaxStreamsCloseCircuit were added in Tor 0.2.7.2-alpha] [ClientAuth was added in Tor 0.2.9.1-alpha. It is v2 only.] [NonAnonymous was added in Tor 0.2.9.3-alpha.] [HS v3 support added 0.3.3.1-alpha] [ClientV3Auth support added 0.4.6.1-alpha]
DEL_ONION
The syntax is:
"DEL_ONION" SP ServiceID CRLF
ServiceID = The Onion Service address without the trailing ".onion"
suffix
Tells the server to remove an Onion ("Hidden") Service, that was previously created via an "ADD_ONION" command. It is only possible to remove Onion Services that were created on the same control connection as the "DEL_ONION" command, and those that belong to no control connection in particular (The "Detach" flag was specified at creation).
If the ServiceID is invalid, or is neither owned by the current control connection nor a detached Onion Service, the server will return a 552.
It is the Onion Service server application's responsibility to close existing client connections if desired after the Onion Service has been removed via "DEL_ONION".
Tor replies with "250 OK" on success, or a 512 if there are an invalid number of arguments, or a 552 if it doesn't recognize the ServiceID.
[DEL_ONION was added in Tor 0.2.7.1-alpha.] [HS v3 support added 0.3.3.1-alpha]
HSPOST
The syntax is:
"+HSPOST" *[SP "SERVER=" Server] [SP "HSADDRESS=" HSAddress]
CRLF Descriptor CRLF "." CRLF
Server = LongName
HSAddress = 56*Base32Character
Descriptor = The text of the descriptor formatted as specified
in rend-spec.txt section 1.3.
The "HSAddress" key is optional and only applies for v3 descriptors. A 513 error is returned if used with v2.
This command launches a hidden service descriptor upload to the specified HSDirs. If one or more Server arguments are provided, an upload is triggered on each of them in parallel. If no Server options are provided, it behaves like a normal HS descriptor upload and will upload to the set of responsible HS directories.
If any value is unrecognized, a 552 error is returned and the command is stopped. If there is an error in parsing the descriptor, the server must send a "554 Invalid descriptor" reply.
On success, Tor replies "250 OK" then Tor MUST eventually follow this with a HS_DESC event with the result for each upload location.
Examples are:
C: +HSPOST SERVER=9695DFC35FFEB861329B9F1AB04C46397020CE31
[DESCRIPTOR]
.
S: 250 OK
[HSPOST was added in Tor 0.2.7.1-alpha]
ONION_CLIENT_AUTH_ADD
The syntax is:
"ONION_CLIENT_AUTH_ADD" SP HSAddress
SP KeyType ":" PrivateKeyBlob
[SP "ClientName=" Nickname]
[SP "Flags=" TYPE] CRLF
HSAddress = 56*Base32Character
KeyType = "x25519" is the only one supported right now
PrivateKeyBlob = base64 encoding of x25519 key
Tells the connected Tor to add client-side v3 client auth credentials for the onion service with "HSAddress". The "PrivateKeyBlob" is the x25519 private key that should be used for this client, and "Nickname" is an optional nickname for the client.
FLAGS is a comma-separated tuple of flags for this new client. For now, the currently supported flags are:
"Permanent" - This client's credentials should be stored in the filesystem.
If this is not set, the client's credentials are ephemeral
and stored in memory.
If client auth credentials already existed for this service, replace them with the new ones.
If Tor has cached onion service descriptors that it has been unable to decrypt in the past (due to lack of client auth credentials), attempt to decrypt those descriptors as soon as this command succeeds.
On success, "250 OK" is returned. Otherwise, the following error codes exist:
251 - Client auth credentials for this onion service already existed and replaced.
252 - Added client auth credentials and successfully decrypted a cached descriptor.
451 - We reached authorized client capacity
512 - Syntax error in "HSAddress", or "PrivateKeyBlob" or "Nickname"
551 - Client with with this "Nickname" already exists
552 - Unrecognized KeyType
[ONION_CLIENT_AUTH_ADD was added in Tor 0.4.3.1-alpha]
ONION_CLIENT_AUTH_REMOVE
The syntax is:
"ONION_CLIENT_AUTH_REMOVE" SP HSAddress
KeyType = "x25519" is the only one supported right now
Tells the connected Tor to remove the client-side v3 client auth credentials for the onion service with "HSAddress".
On success "250 OK" is returned. Otherwise, the following error codes exist:
512 - Syntax error in "HSAddress".
251 - Client credentials for "HSAddress" did not exist.
[ONION_CLIENT_AUTH_REMOVE was added in Tor 0.4.3.1-alpha]
ONION_CLIENT_AUTH_VIEW
The syntax is:
"ONION_CLIENT_AUTH_VIEW" [SP HSAddress] CRLF
Tells the connected Tor to list all the stored client-side v3 client auth credentials for "HSAddress". If no "HSAddress" is provided, list all the stored client-side v3 client auth credentials.
The server reply format is:
"250-ONION_CLIENT_AUTH_VIEW" [SP HSAddress] CRLF
*("250-CLIENT" SP HSAddress SP KeyType ":" PrivateKeyBlob
[SP "ClientName=" Nickname]
[SP "Flags=" FLAGS] CRLF)
"250 OK" CRLF
HSAddress = The onion address under which this credential is stored
KeyType = "x25519" is the only one supported right now
PrivateKeyBlob = base64 encoding of x25519 key
"Nickname" is an optional nickname for this client, which can be set either through the ONION_CLIENT_AUTH_ADD command, or it's the filename of this client if the credentials are stored in the filesystem.
FLAGS is a comma-separated field of flags for this client, the currently supported flags are:
"Permanent" - This client's credentials are stored in the filesystem.
On success "250 OK" is returned. Otherwise, the following error codes exist:
512 - Syntax error in "HSAddress".
[ONION_CLIENT_AUTH_VIEW was added in Tor 0.4.3.1-alpha]
DROPOWNERSHIP
The syntax is:
"DROPOWNERSHIP" CRLF
This command instructs Tor to relinquish ownership of its control connection. As such tor will not shut down when this control connection is closed.
This method is idempotent. If the control connection does not already have ownership this method returns successfully, and does nothing.
The controller can call TAKEOWNERSHIP again to re-establish ownership.
[DROPOWNERSHIP was added in Tor 0.4.0.0-alpha]
DROPTIMEOUTS
The syntax is:
"DROPTIMEOUTS" CRLF
Tells the server to drop all circuit build times. Do not invoke this command lightly; it can increase vulnerability to tracking attacks over time.
Tor replies with "250 OK" on success. Tor also emits the BUILDTIMEOUT_SET RESET event right after this "250 OK".
[DROPTIMEOUTS was added in Tor 0.4.5.0-alpha.]